Products - Electronics

BATTERY ISOLATORS 2X 50AMP

BATTERY ISOLATORS 2X 50AMP
Product code: HPR10002

- Our 'Very Low Drop' automatic battery isolators, or charge sharers, allow to recharge 2 or more batteries simultaneously.
- They automatically separate connected batteries to prevent discharge or “dumping” of the battery with higher remaining charge into the one with lower charge. Thus our isolators initially automatically charge the battery that has the lowest charge and then proceed to the other batteries.
- They have a heavy-duty construction and a rust-proof anodised aluminium case with wide fins. The later feature offers protection from overheating thus extending the isolator life.
- The “Very Low Drop” characteristic guarantees a very small loss of voltage at the exit. The isolators decrease to insignificant levels (less than 0.2 V) the voltage drop on the way from alternator to battery. This is an innovative feature that differentiates our isolators from those of competition.
- All our battery isolators have the protection standard IP 685.
The name "isolators" is used to describe the main function of this appliance, namely, isolation of the batteries from one another during the charging process. They belong to the family of appliances that are used to modify the charging process:
Isolators: electrically isolate batteries; they prevent the "dumping" of one battery into another.
Separators: separate the current only in one way.
Preferentiators: supply more curent to the least charged battery.
Dividers: divide the charge among several batteries.
Our isolators combine these caracteristics and offer an addotional one - the low voltage drop (less than 0.2 V) between the alternator and the battery.

BATTERY ISOLATORS 2X 100 AMP

BATTERY ISOLATORS 2X 100 AMP
Product code: HPR50002

- Our 'Very Low Drop' automatic battery isolators, or charge sharers, allow to recharge 2 or more batteries simultaneously.
- They automatically separate connected batteries to prevent discharge or “dumping” of the battery with higher remaining charge into the one with lower charge. Thus our isolators initially automatically charge the battery that has the lowest charge and then proceed to the other batteries.
- They have a heavy-duty construction and a rust-proof anodised aluminium case with wide fins. The later feature offers protection from overheating thus extending the isolator life.
- The “Very Low Drop” characteristic guarantees a very small loss of voltage at the exit. The isolators decrease to insignificant levels (less than 0.2 V) the voltage drop on the way from alternator to battery. This is an innovative feature that differentiates our isolators from those of competition.
- All our battery isolators have the protection standard IP 685.
The name "isolators" is used to describe the main function of this appliance, namely, isolation of the batteries from one another during the charging process. They belong to the family of appliances that are used to modify the charging process:
Isolators: electrically isolate batteries; they prevent the "dumping" of one battery into another.
Separators: separate the current only in one way.
Preferentiators: supply more curent to the least charged battery.
Dividers: divide the charge among several batteries.
Our isolators combine these caracteristics and offer an addotional one - the low voltage drop (less than 0.2 V) between the alternator and the battery.

BATTERY ISOLATORS 3X100AMP

BATTERY ISOLATORS 3X100AMP
Product code: HPR60002

- Our 'Very Low Drop' automatic battery isolators, or charge sharers, allow to recharge 2 or more batteries simultaneously.
- They automatically separate connected batteries to prevent discharge or “dumping” of the battery with higher remaining charge into the one with lower charge. Thus our isolators initially automatically charge the battery that has the lowest charge and then proceed to the other batteries.
- They have a heavy-duty construction and a rust-proof anodised aluminium case with wide fins. The later feature offers protection from overheating thus extending the isolator life.
- The “Very Low Drop” characteristic guarantees a very small loss of voltage at the exit. The isolators decrease to insignificant levels (less than 0.2 V) the voltage drop on the way from alternator to battery. This is an innovative feature that differentiates our isolators from those of competition.
- All our battery isolators have the protection standard IP 685.
The name "isolators" is used to describe the main function of this appliance, namely, isolation of the batteries from one another during the charging process. They belong to the family of appliances that are used to modify the charging process:
Isolators: electrically isolate batteries; they prevent the "dumping" of one battery into another.
Separators: separate the current only in one way.
Preferentiators: supply more curent to the least charged battery.
Dividers: divide the charge among several batteries.
Our isolators combine these caracteristics and offer an addotional one - the low voltage drop (less than 0.2 V) between the alternator and the battery.

BATTERY ISOLATORS 2X 150AMP

BATTERY ISOLATORS 2X 150AMP
Product code: HPR70003

- Our 'Very Low Drop' automatic battery isolators, or charge sharers, allow to recharge 2 or more batteries simultaneously.
- They automatically separate connected batteries to prevent discharge or “dumping” of the battery with higher remaining charge into the one with lower charge. Thus our isolators initially automatically charge the battery that has the lowest charge and then proceed to the other batteries.
- They have a heavy-duty construction and a rust-proof anodised aluminium case with wide fins. The later feature offers protection from overheating thus extending the isolator life.
- The “Very Low Drop” characteristic guarantees a very small loss of voltage at the exit. The isolators decrease to insignificant levels (less than 0.2 V) the voltage drop on the way from alternator to battery. This is an innovative feature that differentiates our isolators from those of competition.
- All our battery isolators have the protection standard IP 685.
The name "isolators" is used to describe the main function of this appliance, namely, isolation of the batteries from one another during the charging process. They belong to the family of appliances that are used to modify the charging process:
Isolators: electrically isolate batteries; they prevent the "dumping" of one battery into another.
Separators: separate the current only in one way.
Preferentiators: supply more curent to the least charged battery.
Dividers: divide the charge among several batteries.
Our isolators combine these caracteristics and offer an additional one - the low voltage drop (less than 0.2 V) between the alternator and the battery.

BATTERY ISOLATORS 3X50 AMP

BATTERY ISOLATORS 3X50 AMP
Product code: HPR20002

- Our 'Very Low Drop' automatic battery isolators, or charge sharers, allow to recharge 2 or more batteries simultaneously.
- They automatically separate connected batteries to prevent discharge or “dumping” of the battery with higher remaining charge into the one with lower charge. Thus our isolators initially automatically charge the battery that has the lowest charge and then proceed to the other batteries.
- They have a heavy-duty construction and a rust-proof anodised aluminium case with wide fins. The later feature offers protection from overheating thus extending the isolator life.
- The “Very Low Drop” characteristic guarantees a very small loss of voltage at the exit. The isolators decrease to insignificant levels (less than 0.2 V) the voltage drop on the way from alternator to battery. This is an innovative feature that differentiates our isolators from those of competition.
- All our battery isolators have the protection standard IP 685.
The name "isolators" is used to describe the main function of this appliance, namely, isolation of the batteries from one another during the charging process. They belong to the family of appliances that are used to modify the charging process:
Isolators: electrically isolate batteries; they prevent the "dumping" of one battery into another.
Separators: separate the current only in one way.
Preferentiators: supply more curent to the least charged battery.
Dividers: divide the charge among several batteries.
Our isolators combine these caracteristics and offer an addotional one - the low voltage drop (less than 0.2 V) between the alternator and the battery.

BATTERY ISOLATORS 4X50 AMP

BATTERY ISOLATORS 4X50 AMP
Product code: HPR30002

- Our 'Very Low Drop' automatic battery isolators, or charge sharers, allow to recharge 2 or more batteries simultaneously.
- They automatically separate connected batteries to prevent discharge or “dumping” of the battery with higher remaining charge into the one with lower charge. Thus our isolators initially automatically charge the battery that has the lowest charge and then proceed to the other batteries.
- They have a heavy-duty construction and a rust-proof anodised aluminium case with wide fins. The later feature offers protection from overheating thus extending the isolator life.
- The “Very Low Drop” characteristic guarantees a very small loss of voltage at the exit. The isolators decrease to insignificant levels (less than 0.2 V) the voltage drop on the way from alternator to battery. This is an innovative feature that differentiates our isolators from those of competition.
- All our battery isolators have the protection standard IP 685.
The name "isolators" is used to describe the main function of this appliance, namely, isolation of the batteries from one another during the charging process. They belong to the family of appliances that are used to modify the charging process:
Isolators: electrically isolate batteries; they prevent the "dumping" of one battery into another.
Separators: separate the current only in one way.
Preferentiators: supply more curent to the least charged battery.
Dividers: divide the charge among several batteries.
Our isolators combine these caracteristics and offer an addotional one - the low voltage drop (less than 0.2 V) between the alternator and the battery.

BATTERY ISOLATORS 6X50 AMP

BATTERY ISOLATORS 6X50 AMP
Product code: HPR40002

- Our 'Very Low Drop' automatic battery isolators, or charge sharers, allow to recharge 2 or more batteries simultaneously.
- They automatically separate connected batteries to prevent discharge or “dumping” of the battery with higher remaining charge into the one with lower charge. Thus our isolators initially automatically charge the battery that has the lowest charge and then proceed to the other batteries.
- They have a heavy-duty construction and a rust-proof anodised aluminium case with wide fins. The later feature offers protection from overheating thus extending the isolator life.
- The “Very Low Drop” characteristic guarantees a very small loss of voltage at the exit. The isolators decrease to insignificant levels (less than 0.2 V) the voltage drop on the way from alternator to battery. This is an innovative feature that differentiates our isolators from those of competition.
- All our battery isolators have the protection standard IP 685.
The name "isolators" is used to describe the main function of this appliance, namely, isolation of the batteries from one another during the charging process. They belong to the family of appliances that are used to modify the charging process:
Isolators: electrically isolate batteries; they prevent the "dumping" of one battery into another.
Separators: separate the current only in one way.
Preferentiators: supply more curent to the least charged battery.
Dividers: divide the charge among several batteries.
Our isolators combine these caracteristics and offer an addotional one - the low voltage drop (less than 0.2 V) between the alternator and the battery.

VOLTAGE CONVERTERS

VOLTAGE CONVERTERS
Product code: EPA30001

EPA30001 DC/DC converter is a device with wide input voltage, from 16 Vdc to 30 Vdc, that converts the input voltage to output voltage 13.5VDC (custom output voltage also available), maximum continuous current 20 ADC and 30ADC pulsed.
EPA30001 DC/DC converter features high conversion efficiency (>96%).
The maximum device power is 270 Watt for 270cc volume equivalent to 1 Watt/cc ! ! !
Applications
• Battery Back-Up
• Lighting Systems
• DC-Motors Power Supply
Features
• RoHS lead free and lead-solder-exempt products are available
• Wide input voltage range: 16VDC – 30VDC
• High continuous output current: 20ADC
• High Pulse output current: 30ADC @10ms
• Output voltage range: 13.5VDC ± 0.5VDC
• High Efficiency: > 96%
• Overcurrent and overtemperature protections
• Current Tracking during turn-on and turn-off with slew rates guaranteed
• Fully rated current sink
• Real time current and temperature measurements and monitoring
• Small footprint package: 127x136mm
• Low profile: 66mm
• Wide operating temperature range: -40°C ÷ +105°C

PROTECTION FILTER 12V 5A

PROTECTION FILTER 12V 5A
Product code: EPFF0010

The electronic filters protect on-board equipment (Radars, GPS, Loran, Echo sounders, VHF, etc.) from power surges, overloads and other related problems that are mostly caused by the excess current produced when the engine gets activated during manoeuvres, anchor winches, and during atmospheric phenomena.
Placed between the feeding source and the equipment that needs to be protected, the electronic filters solve all the above-mentioned problems.
They are available in the 12V 2A and 5A version and in the 24V 2A and 5A version.

TWILIGHT SWITCH FOR 12V/24V DC APPLIANCES

TWILIGHT SWITCH FOR 12V/24V DC APPLIANCES
Product code: EPT50001

The twilight switch automatically puts on connected appliances depending on the ambient luminosity.

The twilight switch is suitable for any kind of DC appliances such as engines, alarms, lamps, electronic valves, lights for vessels at anchor, running light, pumps, etc.

INNER POWER SUPPLY SWITCHING 12V-10W

INNER POWER SUPPLY SWITCHING 12V-10W
Product code: EPCD0002

DB35F COMPRESSOR POWER SUPPLY (RECTIFIER)

DB35F COMPRESSOR POWER SUPPLY (RECTIFIER)
Product code: EPCD0001

The power supply allows to use electrical apparatus equipped with a Danfoss compressor BD35F type fed directly from the mains 230Vac (where available).
In the presence of the mains the feeding of the compressor is carried out by the power supply.

The power supply commutates automatically the compressor on the battery (if the battery is connected) when the supply mains is disconnected.

BILGE PUMP SWITCH 12V/24V DC 15A

BILGE PUMP SWITCH 12V/24V DC 15A
Product code: EPIP0006

Our non-mercury electronic bilge pump switch has no moving internal parts and is very easy to install. It incorporates a reliable control system which is activated only when the water is in the bilge. The Bilge Pump Switch is 12VDC/24VDC and 15A.

DIMMER FOR 12VDC OR 24VDC APPLIANCES

DIMMER FOR 12VDC OR 24VDC APPLIANCES
Product code: EPD90003

This Dimmer regulates the power of the appliance (lamps, small motors, fans, electric stoves, cookers, bilge pumps, etc.), depending on the setting of lighting being used, i.e. off-on and all settings in between. The Dimmer has a protection against short accidental short circuits. The system offers the advantage of a 'smooth' switching on of lamps and motors avoiding any related stress and extending their lifetime.

It must not be used with electronic appliances such as radios, television sets, etc.

• The 12Vdc version can bear a maximum load of 180W

• The 24Vdc version can bear a maximum load of 360W


NAVAL SIREN (FOGHORN)

NAVAL SIREN (FOGHORN)
Product code: EPDN0001

The Naval Siren is equipped with an electronic whistle and a voice amplifier. It is used for boats between 12 and 20 m in length. The kit includes a button for whistle activation, an electronic switchboard with an A/B class amplifier located on the control panel, a microphone for transmission of voice messages and a loudspeaker.

Besides its traditional use in the marine sector this appliance can also be used in recreational and sport centers, schools, etc.

TALKING ALARM

TALKING ALARM
Product code: EPDC0001

The Talking Alarm is used either in emergency situations or for broadcasting information. It can store and reproduce voice messages of a maximum length of 30 seconds. The band is 3.4kHz, which ensures high sound quality. It has two listening modes: single message and continuous mode. In order to listen to the message it is sufficient to connect the siren to the power supply.

FRAGMENTATOR SUITABLE FOR 24/12V DC APPLIANCES

FRAGMENTATOR SUITABLE FOR 24/12V DC APPLIANCES
Product code: EPDA0002

The Fragmentator allows to use 12 V dc bulbs when 24 V dc is available. It is specifically designed for use with bulbs but it can also be employed for motors, fans, bilge pumps, refrigerators, electric stoves, cookers and any other appliances but not electronic appliances (such as radios, television sets, audio cassette players etc.).
The device is protected against short circuit of the load.