Products - Liquid Level Senders

LEVEL SENDERS (REED MATRIX)

LEVEL SENDERS (REED MATRIX)
Product code: HPYXXXXX/HPWXXXXX

ALL LIQUID USER'S GUIDE .PDF ATTACHED
Our liquid level senders are level indicating devices compatible with all the petrol and water level gauges available on the market.
They are fuel, sea-water and acid resistant because they are made of the highest stainless steel AISI 316. They are perfectly watertight and have a flange with holes that allows a perfect fitting on the tank.
The sender cables must be connected to the measuring terminals of the indicating instruments, as explained in the user's manuals of the later.

The level indicating gauges available on the market can be divided into two main categories:

1) standard gauges (STD)
2) inverted gauges (VDO-type)


We manufacture two different models of liquid level senders to enable them to adapt to any kind of gauge available on the market, as shown in the following table:

L.L. SENDER MODEL:STD
EMPTY 240 Ohm
FULL 33 Ohm

L.L. SENDER MODEL:VDO-type
EMPTY 10 Ohm
FULL 180 Ohm

All our senders have protection standard IP 687.
We offer our customers our standard range as well as customized and OEM solutions. All our senders are manufactured according to the highest standards of quality, backed by the reputation for reliability and expeditious service and have a very competitive price!

FUEL CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT VOLTAGE 0-10 V

FUEL CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT VOLTAGE 0-10 V
Product code: PCHVOLTXXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.
It is available in different sizes (10 to 100cm and up to 200cm upon request)

It is available in several models compatible with the following gauges:

-0-10 V (as voltage), power supply: 12 to 28 V dc

The level sensor model PCHVOLTXXX is specific for fuel and has an alarm output (A) active when the liquid level in the tank is less than 20% of the tank capacity.

There is also a model with active alarm when the fuel level drops by 5% in less than 5 minutes upon request. This alarm is, for example, to be used to report the theft of fuel from the tank.

WHITE WATER CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT VOLTAGE 0-10 V

WHITE WATER CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT VOLTAGE 0-10 V
Product code: PHVOLTXXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.
It is available in different sizes (10 to 100cm and up to 200cm upon request)

It is available in several models compatible with the following gauges:

-0-10 V (as voltage), power supply: 12 to 28 V dc

The level sensor model PHVOLTXXX is specific for clear water and has an alarm output (A) active when the liquid level in the tank is less than 20% of tank capacity.

WASTE WATER CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT VOLTAGE 0-10 V

WASTE WATER CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT VOLTAGE 0-10 V
Product code: PWVOLTXXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.

It is available in different sizes (10 to 100cm and up to 200cm upon request)

It is compatible with the following gauges:

-0-10 V (as voltage), power supply: 12 to 28 V dc

The level sensor model PWVOLTXXX is specific for black waters and has an alarm output (A) active when the liquid level in the tank is higher than 80% of tank capacity.

FUEL CAPACITIVE LEVEL SENSOR , OUTPUT RS 232

FUEL CAPACITIVE LEVEL SENSOR , OUTPUT RS 232
Product code: PCHS1XXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.

It is available in different sizes (10 to 100 cm and up to 200 cm upon request)

It is available with serial communications such as:

RS232, power supply : from 5 to 18 V dc

The level sensor model PCHS1XXX has an interface that allows the transmission of information (level of liquid in the tank) to standard RS232 to 9.600 bit/s (no parity, 1 stop bit).

WHITE AND WASTE WATER CAPACITIVE LEVEL SENSOR, RS 232 OUTPUT

WHITE AND WASTE WATER CAPACITIVE LEVEL SENSOR, RS 232 OUTPUT
Product code: PHWS1XXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the water and waste water level contained within a tank.

It is available in different sizes (10 to 100 cm and up to 200 cm upon request)

It is available with serial communications such as:

RS-232, power supply : from 5 to 18 V dc

The level sensor model PHWS1XXX has an interface that allows the transmission of information (level of liquid in the tank) with the standard RS232 to 9.600 bit/s (no parity, 1 stop bit).

FUEL CAPACITIVE LEVEL SENSOR , OUTPUT RS 422-485

FUEL CAPACITIVE LEVEL SENSOR , OUTPUT RS 422-485
Product code: PCHS2XXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.
It is available in different sizes (10 to 100cm and up to 200cm upon request)

It is available in several models compatible with the following gauges:

It is available with serial communications such as:

-RS422/RS485, power supply : 5-18 V dc

the level sensor models PCHS2XXX has an interface that allows the transmission of information (level of liquid in the tank) to standard RS485 or RS422 to 9.600bit/s (no parity, 1 stop bit).

WHITE AND WASTE WATER CAPACITIVE LEVEL SENSOR , OUTPUT RS 422-485

WHITE AND WASTE WATER CAPACITIVE LEVEL SENSOR , OUTPUT RS 422-485
Product code: PHWS2XXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the water and waste water level contained within a tank.
It is available in different sizes (10 to 100cm and up to 200cm upon request)

It is available with serial communications such as:

-RS422/RS485, power supply : from 5 to 18 V dc

The level sensor model PHWS2XXX has an interface that allows the transmission of information (level of liquid in the tank) to standard RS232 to 9.600 bit/s (no parity, 1 stop bit).

FUEL CAPACITIVE LEVEL SENSOR , 2 ALARMS, RESISTIVE TYPE (3-180 OHM OR 240-33 OHM)

FUEL CAPACITIVE LEVEL SENSOR , 2 ALARMS, RESISTIVE TYPE (3-180 OHM OR 240-33 OHM)
Product code: PCHG2AXXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.
It is available in different sizes (10 to 100cm and up to 200cm upon request)

It is available in several models compatible with the following gauges:
• 3-180 ohms (resistive VDO type), open circuit voltage from the coil of the instrument: 5 to 18Vdc
• 240-33 ohms (resistive type standard), open circuit voltage from the coil of the instrument: 5 to 18Vdc

In the models mentioned above, an alarm has been previewed when you reach the reserve and / or to signal the imminent filling of the tank.

The resistive sensors (model PCHG2AXXX and PHWG2AXXX) have a bridge which is useful to choose to work with the STD 240-33 ohm American gauge system (intact bridge) or with gauges like the VDO 3-180 ohm European System (cut bridge).

The resistive level sensors models are equipped with two alarm outputs (A1 and A2), the first is active when the level of liquid in the tank is less than 20% (empty alarm) and the second is active if the level exceeds 80% of the tank capacity (full alert).

FRESH AND WASTE WATERS CAPACITIVE LEVEL SENSOR , 2 ALARMS, RESISTIVE TYPE (3-180 OHM OR 240-33 OHM)

FRESH AND WASTE WATERS CAPACITIVE LEVEL SENSOR , 2 ALARMS, RESISTIVE TYPE (3-180 OHM OR 240-33 OHM)
Product code: PHWG2AXXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the water and waste water level contained within a tank.

It is available in different sizes (10 to 100 cm and up to 200 cm upon request)

It is available in several models compatible with the following gauges:

• 3-180 ohms (resistive VDO type), open circuit voltage from the coil of the instrument: 5 to 18 V dc

• 240-33 ohms (resistive type standard), open circuit voltage from the coil of the instrument: 5 to 18Vdc

In the models mentioned above, an alarm has been previewed when you reach the reserve and / or to signal the imminent filling of the tank.

The resistive sensors (model PCHG2AXXX and PHWG2AXXX) have a bridge which is useful to choose to use the STD 240-33 ohm American gauge system (intact bridge) or with gauges like the VDO 3-180 ohm European System (cut bridge).

The resistive level sensors models are equipped with two alarm outputs (A1 and A2), the first is active when the level of liquid in the tank is less than 20% (empty alarm) and the second is active if the level exceeds 80% of the tank capacity (full alert).

FUEL CAPACITIVE LEVEL SENSOR , 2 ALARMS, RESISTIVE TYPE 3-90 OHM

FUEL CAPACITIVE LEVEL SENSOR , 2 ALARMS, RESISTIVE TYPE 3-90 OHM
Product code: PCHK2AXXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.

It is available in different sizes (10 to 100 cm and up to 200 cm upon request)

It is available in several models compatible with the following gauges:

-90 Ohm (resistive type), open circuit voltage from the coil of the gauge: 5÷18Vdc

In the models mentioned above, two alarms have been previewed when you reach the reserve and / or to signal the imminent filling of the tank.

WHITE AND WASTE WATER CAPACITIVE LEVEL SENSOR , 2 ALARMS, RESISTIVE TYPE 3-90 OHM

WHITE AND WASTE WATER CAPACITIVE LEVEL SENSOR , 2 ALARMS, RESISTIVE TYPE 3-90 OHM
Product code: PHWK2AXXX

This level meter is is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the water and waste water level contained within a tank.
It is available in different sizes (10 to 100 cm and up to 200 cm upon request)

It is compatible with the following gauges:

- 90 ohms (resistive type), open circuit voltage from the coil of the instrument: 5 to 18 V dc

The resistive level sensors models are equipped with two alarm outputs (A1 and A2), the first is active when the level of liquid in the tank is less than 20% (empty alarm) and the second is active if the level exceeds 80% of the tank capacity (full alert).

FUEL CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT CURRENT 4-20MA

FUEL CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT CURRENT 4-20MA
Product code: PCHAMPXXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.
It is available in different sizes (10 to 100cm and up to 200cm upon request)

It is available in several models compatible with the following gauges:

4-20 mA (in current), open circuit voltage from the coil of the instrument: 5 to 18Vdc

The PCHAMPXXX level sensor model is specific for fuel and has an alarm output (A) active when the liquid level in the tank is less than 20% of the tank capacity. There is also another model with active alarm when the fuel level drops by 5% in less than 5 minutes Upon request. This alarm is, for example, to be used to report the theft of fuel from the tank.

WHITE WATER CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT CURRENT 4-20 MA

WHITE WATER CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT CURRENT 4-20 MA
Product code: PHAMPXXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.
It is available in different sizes (10 to 100cm and up to 200cm upon request)

It is available in several models compatible with the following gauges:
-4-20 mA (in current), open circuit voltage from the coil of the instrument: 5 to 18Vdc

The level sensor model PHAMPXXX is specifically for clear water and has an alarm output (A) active when the liquid level in the tank is less than 20% of tank capacity.

WASTE WATER CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT CURRENT 4-20MA

WASTE WATER CAPACITIVE LEVEL SENSOR , 1 ALARM, OUTPUT CURRENT 4-20MA
Product code: PWAMPXXX

This level meter is from the capacitive type and very innovative, protected by an international Patent valid worldwide (EU Pat. N. 1657533)

It is suitable to measure the fuel level contained within a tank.
It is available in different sizes (10 to 100 cm and up to 200 cm upon request)

It is available in several models compatible with the following gauges:

-4-20 mA (as current), power supply: 5 to 18 V dc

The level sensor model PWAMPXXX is specific for waste waters and has an alarm output (A) active when the liquid level in the tank is higher than 80% of tank capacity.